Queclink GL300 User Guide

GL300 Manage Tool User Guide
TRACGL300MT001 - 20 -
3.2.2 Set the parameters of Backend Server Register Information
Step_1: Select “Backend Server Register Information”, after that the parameters of GTSRI show
in Command Operation Space.
Step_2: The command message which shall be sent to GL300 will be generated based on input
and displayed here. Please note this command message can also be sent to GL300
through SMS or GPRS.
Step_3: It is recommended to read the parameters from GL300 and edit based on them
Step_4: Set backend server information parameters. Please refer to “GL300 @Track Air Interface
Protocol” for the meaning of each parameter.
Step_5: Click the “Send” button; download the parameters of GTSRI to GL300.
Step_1
Step_4
Step_2
Step_3
Step_5
Queclink
Confidential

Queclink GL300 Specifications

General

Brand	Queclink
Model	GL300
Category	GPS
Language	English