Queclink GL300 - Set the Parameters of Geo-Fence Information

GL300 Manage Tool User Guide
TRACGL300MT001 - 30 -
Step_5: Click the “Send” button; download the parameters of GTFRI to GL300.
3.2.12 Set the parameters of Geo-Fence Information
Step_1: Select “Geo-Fence Configuration”, after that the parameters of GTGEO show in
Command Operation Space.
Step_2: The command message which shall be sent to GL300 will be generated based on input
and displayed here. Please note this command message can also be sent to GL300
through SMS or GPRS.
Step_3: It is recommended to read the parameters from GL300 and edit based on them
Step_4: Set the Geo-Fence parameters. Please refer to “GL300 @Track Air Interface Protocol” for
the meaning of each parameter.
Step_5: Click the “Send” button; download the parameters of GTGEO to GL300.
Step_1
Step_4
Step_2
Step_3
Step_5
Queclink
Confidential