Queclink GL300 - Set the Parameters of Outside Working Hours

GL300 Manage Tool User Guide
TRACGL300MT001 - 28 -
3.2.10 Set the parameters of Outside Working Hours
Step_1: Select “Outside Working Hours”, after that the parameters of GTOWH show in Command
Operation Space.
Step_2: The command message which shall be sent to GL300 will be generated based on input
and displayed here. Please note this command message can also be sent to GL300
through SMS or GPRS.
Step_3: It is recommended to read the parameters from GL300 and edit based on them.
Step_4: Set the Outside Working Hours parameters. Please refer to “GL300 @Track Air Interface
Protocol” for the meaning of each parameter.
Step_5: Click the “Send” button; download the parameters of GTOWH to GL300.
Step_4
Step_3
Step_5
Step_2
Step_1
Queclink
Confidential