GL300 Manage Tool User Guide
TRACGL300MT001 - 10 -
This function is only for technology diagnosis when the device report data abnormally, please
ignore it when it works normally.
2.4.3 Toolbar
It include “COM Setting”, “Operation Log”, “Quick Setting Wizard”, “Real All Configuration”,
“Execute All Configuration” , “Save All Configuration”, “Connect/Disconnect to COM”.
[COM Setting]: It is used to set the COM information and password. Setting details please refer
to chapter 2.2.
[Operation Log]: It is used to display/hidden operation log.
[Quick Setting Wizard]: It is used to open quick setting wizard directly. Please refer to chapter
3.1 for details.
[Read All Configuration]: It is used to display/hidden operation log.
“Read From Device”: It is used to read all configuration from device which connects to PC.
“Load Configuration From File”: It is used to load configuration file to the manage tool.
[Send All Configuration]: It is used to execute all configurations in Command Operation Space
except GTRTO.
To Next Page
Loading...
