Queclink GL300 - Protocol Watchdog (AT+GTDOG)

GL300 Manage Tool User Guide
TRACGL300MT001 - 38 -
3.2.20 Set the parameters of Voice Monitor
Step_1: Select “Voice Monitor”, after that the parameters of GTMON show in Command
Operation Space.
Step_2: The command message which shall be sent to GL300 will be generated based on input
and displayed here. Please note this command message can also be sent to GL300 through
SMS or GPRS.
Step_3: It is recommended to read the parameters from GL300 and edit based on them.
Step_4: Set the Voice Monitor parameters. Please refer to “GL300 @Track Air Interface Protocol”
for the meaning of each parameter.
Step_5: Click the “Send” button; download the parameters of GTMON to GL300.
Step_1
Step_2
Step_4
Step_3
Step_5
Queclink
Confidential