Queclink GL300 - White Call List Configuration (AT+GTWLT)

GL300 Manage Tool User Guide
TRACGL300MT001 - 34 -
3.2.16 Set the parameters of Transparent Data Transmission
Step_1: Select “Transparent Data Transmission”, after that the parameters of GTDAT show in
Command Operation Space.
Step_2: The command message which shall be sent to GL300 will be generated based on input
and displayed here. Please note this command message can also be sent to GL300
through SMS or GPRS.
Step_3: Set the transparent data transmission parameters. Please refer to “GL300 @Track Air
Interface Protocol” for the meaning of each parameter.
Step_4: Click the “Send” button; download the parameters of GTDAT to GL300.
Step_1
Step_2
Step_3
Step_4
Queclink
Confidential