Queclink GL300 - Set the Parameters of Global Configuration

GL300 Manage Tool User Guide
TRACGL300MT001 - 22 -
3.2.4 Set the parameters of Global Configuration
Step_1: Select “Global Configuration”, after that the parameters of GTCFG show in Command
Operation Space.
Step_2: The command message which shall be sent to GL300 will be generated based on input
and displayed here. Please note this command message can also be sent to GL300
through SMS or GPRS.
Step_1
Step_2
Step_4
Step_3
Step_5
Step_4
Queclink
Confidential