Quectel QuecOpen AG525R-GL

Automotive Module Series
AG525R-GL QuecOpen
Hardware Design
AG525R-GL_QuecOpen_Hardware_Design 38 / 104
1. “Alternate Function 1/2” takes effect only after software configuration.
2.
1)
See Table 4 for more details about the symbol description.
3.
2)
If the GPIOs without interrupt function are configured as interrupt GPIOs, power consumption of the module will be increased. (“Y” means “interrupt function supported”. “N” means “interrupt
function not supported”.)
4. Pins 69 and 83 cannot be pulled up before power-up.
102 GPIO3
GPIO
BS-PD, L N 1.8 V
104 GPIO4 BS-PD, L N 1.8 V
116 GPIO5 BS-PD, L N 1.8 V
243 GPIO6 BS-PD, L N 1.8 V
246 GPIO7 BS-PD, L Y 1.8 V
249 GPIO8 L N 1.8 V
264 GPIO9 BS-PD, L Y 1.8 V
267 GPIO10 BS-PD, L N 1.8 V
289 GPIO11 BS-PD, L Y 1.8 V
NOTES