263
Coffee dosing controls
On the front of the machine there are the illuminated dosing keys.
Key 1 = expresso
Key 2 = long coffee
Key 3 = double expresso
Key 4 = double long coffee
Key 5 = continuous does dose
Using one of the keys from 1 to 4, the machine starts delivery, stopping when the
set dose is reached (see “Dose setting”). For key 5 “continuous dose”, delivery
has to be stopped by pressing the same key again.
Dose setting
Coffee dosing takes place automatically through the specific keys which, in the
factory have been assigned a default quantity.
If it is wished to change the quantity of the doses, proceed as follows:
1. Switch on the machine.
2. Press key 5 (continuous dose) so that it flashes.
3. Press one of the dosing keys from 1 to 4 to start the dosing.
4. Press the same key again to stop the dosing at the required quantity.
5. The machine has saved the dose.
6. Continue the programming with another key or exit from programming
waiting 5 seconds or pressing key 5 again.
1 2 3 4 5
To Next Page
Loading...
Need help?
General
