278
OLED Display Functions - Operator Menu
Switching on
When the main switch (k) is turned to the ON position, the QuickMill logo and the
water temperature appear on the display for a few seconds. The heating element
symbol in the right-hand corner indicates that heating is in progress. When the
machine is at temperature the symbol disappears.
Example:
By pressing the side buttons, the temperature can be adjusted directly. When the
adjustment is complete, after a few seconds the word '' disappears from the
display and the display returns to the actual temperature.
Temperature unit
To enter the menu, press the up arrow for five seconds.
The display shows the temperature unit
TEMP. UNIT.
Press the left arrow to set degrees in Fahrenheit.
TEMP. UNIT.
To Next Page
Loading...
