7. Replace the backpost adjustment screws. Use 10 N/m or
88.5 in/lb of torque, (Fig.6.20).
Fig. 6.20
8. If removed in Number 4, replace the towel bar and the towel
bar bolts. Use 10 N/m or 88.5 in/lb of torque, (Fig.6.21).
NOTE: The towel bar may be repositioned at this point as
well.
Fig. 6.21
9. Replace both top upholstery bolts. Ensure the bolts
thread through the top upholstery eyelets (A),
(Fig.6.22).
Fig. 6.22
10. Retighten the upholstery straps, (Fig.6.23).
Fig. 6.23
11. Reattach the upholstery cover, (Fig.6.24).
Fig. 6.24
To Next Page
Loading...
Need help?
General