26
Beyond the Basics
5. To release the hold and continue
searching, press HOLD/RESUME.
Note: To step through the
frequencies while HOLD appears,
press T or S.
storing found frequencies
during chain search
You can store frequencies you fi nd in chain
search mode or chain search hold mode.
1. Press E/PGM when you fi nd a
frequency. The bank numbers fl ash.
2. Press the bank number you want to
store the frequency. The smallest empty
channel number and “000.0000” fl ashes
on and off over the frequency you want
to store.
3. Press S or T to move to the channel
where you wish to store the frequency.
4. Press E/PGM to enter the frequency.
programming search ranges
You can defi ne the search range during a
chain search in each search bank.
1. Press and hold E/PGM in chain search
or chain search hold mode. The lowest
and the highest frequencies of Bank 1
appear alternately.
Notes
To Next Page
Loading...
