41
Beyond the Basics
To turn on the data skip feature;
1. Turn off the priority feature if it is on
(see “priority”).
2. Press MENU.
3. Repeatedly press S or T to display
dAtA-S, then press E/PGM.
4. Repeatedly press S or T to select OFF
or ON, then press E/PGM.
5. Press MENU to exit the menu mode.
Note: This feature does not apply
to the air band and weather search
mode as data signals are not
generally found in these services.
receiving nwr-same and
weather alert signals
In 1994, the National Oceanic and
Aerospace Administration (NOAA) began
broadcasting alerts that include digitally
encoded data. Specifi c Area Message
Encoding (SAME) includes information
which identifi es the severity of the alert.
While this scanner does not encode
specifi c geographical data, it does detect
SAME signals and decode the alert level.
The scanner displays this data as codes
corresponding to the levels of severity (L1,
L2, and L3).
Notes
To Next Page
Loading...
