32
Beyond the Basics
special features
delay
Sometimes a user might pause before
replying to a transmission. To avoid
missing a reply on a specifi c channel, the
scanner automatically programs a 2-second
delay into any channel or frequency. You
can monitor the channel frequency for an
additional 2 seconds after the transmission
stops before resuming scanning or
searching.
Depending on the scanner operation,
follow one of these steps to turn off or on a
delay.
• To turn off the 2-second delay, press
•/CLR /DELAY while the scanner is
monitoring a channel, scanning, or
searching. DLY disappears.
• To turn on the 2-second delay to a
channel again, select the channel and
press •/CLR /DELAY. DLYappears.
• To turn on the 2-second delay to search
again, press •/CLR /DELAY while the
scanner is searching.
DLY appears and the scanner automatically
adds a 2-second delay to every frequency it
stops on in that band.
Signal Stalker I also has a delay feature. It’s
delay time is 10 seconds.
To Next Page
Loading...
