65
Beyond the Basics
2. Use S or T to choose trunk system,
then press E/PGM.
3. Use S or T and choose Prog id, then
press E/PGM.
4. Press S or T to select the scan list
location.
5. Enter the talk group IDs for each trunk
system.
Motorola talk groups
To enter a Type 2 Talk Group ID:
1. Enter the ID you want to store by using
the keypad.
2. Press E/PGM.
To enter a Type 1 ID:
For a Type I ID, enter the block number,
fl eet number and subfl eet number to form
the talk group ID number.
1. Enter the ID you want to store by using
the keypad (ID = Block number + Fleet
number + •/CLR/DELAY + Subfl eet
number).
2. Press E/PGM.
To Next Page
Loading...
