34
Beyond the Basics
manually select the channel, then press
L/O. L/O appears.
Note: You can still manually select
locked-out channels.
To remove the lockout from a channel,
manually select the channel, then press
L/O. L/O disappears.
To unlock all channels in the banks that are
turned on, press HOLD/RESUME to stop
scanning, then hold down L/O until the
scanner beeps twice.
priority
The priority feature lets you scan through
the channels and still not miss important or
interesting calls on specifi c channels. You
can program one stored channel in each
bank as a priority channel. If the priority
feature is turned on, as the scanner scans
the bank, it checks that bank’s priority
channel for activity every 2 seconds.
The scanner automatically designates each
bank’s fi rst channel as its priority channel.
Follow these steps to select a different
channel in a bank as the priority channel.
1. Press E/PGM.
2. Enter the channel number you want
to select as the priority channel, then
press PRI.
P appears to the right of the
selected channel number.
Notes
To Next Page
Loading...
