Radio Shack PRO-93 - Talk Group ID Hold Function

60
Trunking Operation
9. To store the next ID memory in sequence, press
8
88
8
and repeat Step 4.
10. Press
SCAN
to start scanning.
Notes:
• If you made a mistake in Step 4,
%EM8C@;ý %
%EM8C@;ý % %EM8C@;ý %
%EM8C@;ý %
.
appears and the scanner beeps when you press
ENTER
. Start again at Step 3.
• You can enter either decimal or AFS code for ED
(EDACS) ID. The default setting is decimal ID
entry. When you press
FUNC
then
2
,
ã"/ý=FID8K
ã"/ý=FID8Kã"/ý=FID8K
ã"/ý=FID8K
appears for about 2 seconds. Now you can enter
the ID code with AFS format.
• If you entered an ID code that is already stored in
another ID channel,
LGCý%
LGCý% LGCý%
LGCý%
appears. If you want
to store the ID code, press
ENTER.
To cancel the
operation, press
CL
.
Talk Group ID Hold
You can set your scanner to follow a trunking signal that
you want to track during scanning. Hold down
TRUNK
for
more than 2 seconds.
% ý?FC;ý+*ô
% ý?FC;ý+*ô% ý?FC;ý+*ô
% ý?FC;ý+*ô
appears.
When ID hold is activated and the scanner receives a
voice channel, the scan indication
/
//
/
at the first digit in the
top line is changed to
$
$$
$
.
To release ID hold, press
SCAN
or
TRUNK
.
8Wdaý&#&
8Wdaý&#&8Wdaý&#&
8Wdaý&#& ED
EDED
ED
?:ýD
?:ýD?:ýD
?:ýD e$
e$e$
e$ý&'
ý&'ý&'
ý&'
CEJ0ýded[
CEJ0ýded[CEJ0ýded[
CEJ0ýded[
Next location
8Wdaý&#&
8Wdaý&#&8Wdaý&#&
8Wdaý&#& ED
EDED
ED
?:ýD
?:ýD?:ýD
?:ýDe$
e$e$
e$ý&&
ý&&ý&&
ý&&
CEJ0ý&(//(
CEJ0ý&(//(CEJ0ý&(//(
CEJ0ý&(//(
:kfbý?:ý'#'(
:kfbý?:ý'#'(:kfbý?:ý'#'(
:kfbý?:ý'#'(
Duplication