41
Operation
The scanner scans through all channels (except those
you have locked out) in the active banks (see "Turning
Channel-Storage Banks Off and On" and “Locking Out
Channels or Frequencies” on Page 42).
Note:
To change the scanning direction, press
8
88
8
or
9
99
9
.
Turning Channel-Storage Banks Off and
On
To turn off banks while scanning, press the bank's num-
ber key so the bank's number disappears. For example,
to turn off bank 1, press
1
. The scanner does not scan
any of the channels within the banks you turned off.
Notes:
• You cannot turn off all banks. There must be at least
one active bank.
• You can manually select any channel in a bank,
even if the bank is turned off.
To turn on banks while scanning, press the number key
until the bank's number appears. For example to turn
bank 1 on again, press
1
.
Deleting Frequencies from Channels
1. Press
MANUAL
.
2. Use the number keys to enter the channel with the
frequency you want to delete.
3. Press
MANUAL
again.
4. Press
PGM
to enter the program mode.
)
))
)
changes
to
,
,,
,
.
To Next Page
Loading...
