Radio Shack PRO-93 - Assigning Tags to Group IDs and Banks

28
Operation
• "A" is the first letter associated with 2 on the key-
pad. Press
2
then
1
.
• "M" is the first letter associated with 6 on the key-
pad. Press
6
then
1
.
• "Space." Press
./DELAY
.
• "6" is the sixth number associated with 1 on the
keypad. Press
1
then
6
.
• "m" is the first letter associated with 6 on the key-
pad. Press
6
and
FUNC
(for the lower case set),
then press
1
.
5. Press
ENTER
to input the text.
Assigning a Text Tag to a Group ID
1. Press
PGM
.
2. Press
TRUNK
.
3. Press
FUNC
then
8
88
8
or
9
99
9
to select the desired
bank.
4. Press
TRUNK
to select the desired sub-bank.
5. Press or hold down
8
88
8
or
9
99
9
to select the desired
group ID.
6. Press
TEXT
then enter the tag using the keypad.
(See “Text Input Chart” on Page 29.)
7. Press
ENTER
to store.
Assigning a Text Tag to a Bank
1. Select a channel within the desired bank by press-
ing
MANUAL
and entering the bank number (
000
for
bank 0 or
200
for bank 2, for example). Press
MAN-
UAL
again.
2. Press
PGM
.
3. Press
FUNC
then
7
. The cursor appears at the third
line of the display. Enter the text using the keypad.
(See “Text Input Chart” on Page 29.)