Radio Shack PRO-93 - ID Delay, Reviewing Lockouts, and Clearing IDs

62
Trunking Operation
1. Press
TEXT
while the scanner is receiving the voice
channel and indicating the text name. The ID code
appears as
)+0è444444
)+0è444444)+0è444444
)+0è444444
or
! è4444
! è4444! è4444
! è4444
.
2. Press
TEXT
again to cancel.
Delay Function in ID Indication Mode
You can set the ID delay function separate from the
channel delay.
1. Press
FUNC
then
./DELAY
while you are program-
ming the trunked ID.
1J<ý 1Gó FNEý B<PJýKFý J<Ký %
1J<ý 1Gó FNEý B<PJýKFý J<Ký % 1J<ý 1Gó FNEý B<PJýKFý J<Ký %
1J<ý 1Gó FNEý B<PJýKFý J<Ký %
;<C8P
;<C8P;<C8P
;<C8P
.
ý
ýý
ýðôòýJ<:FE;J
ðôòýJ<:FE;JðôòýJ<:FE;J
ðôòýJ<:FE;J
appears.
2. Press
8
88
8
or
9
99
9
to select
*FE<
*FE<*FE<
*FE<
,
òôí
òôíòôí
òôí
,
ñôò
ñôòñôò
ñôò
,
ñôí
ñôíñôí
ñôí
,
ðôò
ðôòðôò
ðôò
,
ðôí
ðôíðôí
ðôí
,
ïôò
ïôòïôò
ïôò
,
ïôí
ïôíïôí
ïôí
or
îôò
îôòîôò
îôò J<:FE;J
J<:FE;JJ<:FE;J
J<:FE;J
.
3. Press
ENTER
.
Note:
When activated, ID delay watches the control
channel command for the delay time when the signal
disappears from the voice channel.
Reviewing Locked-Out Talk Group IDs
Note:
You cannot clear all lockouts from a talk group at
the same time.
1. Press
PGM
then
TRUNK
.
2. Press
FUNC
then
L/OUT
. The locked out ID appears.
If the ID memory bank has no locked out ID, you
hear the low beep tone.
3. Press
FUNC
then
8
88
8
or
9
99
9
to select a search bank.
Or, just press
8
88
8
or
9
99
9
to search for any locked out
IDs in a bank.
Clearing Talk Group IDs
1. Press
PGM
then
TRUNK
.
2. Press
FUNC
,
8
88
8
or
9
99
9
to select ID memory.
3. Press
FUNC
then
CL
.