Radio Shack Racing Scanner - Basic Operation; Turning on the Scanner; Selecting a Race Series; Listening to Race Transmissions

10
Basic Operation
Basic Operation
Turning on the Scanner
PressandholdG/î.Thescannerturnsonandawelcome
messageappearsforabout2seconds.Pressandholdagaintoturn
off.
Selecting a Race Series
1. TurntheSEL/VOLdialontopofthescannertoselectoneofthe
followingpresetracetypes:
• NASCAR SprintCu(SprintCup)
• NASCARnationwid(NationWideSeries)
• NASCAR Truck
• ARCA(ARCARE/MAXSeries)
• Grand Am
• IRL (Indy) (IndyRacingLeague)
2. PressENT.LOAD DATA!!appearsbrieytoremindyouthatyour
carnumber/channeldatamaynotbeuptodate.
Listening to Race Transmissions
Afteryouselectaraceseries,thereareseveraloptionsforlistening
attherace.
n Note: Series names, car numbers, and drivers are subject to
change without notice. Check that you have up-to-date information
before you go to the race.
Browsing All Car Numbers
TurntheSEL/VOLdialtoscrollthroughcarnumbersanddriver
names.Iftherearenotransmissions,keepscrolling.