Radio Shack Racing Scanner - Basic Operation; Manually Inputting Car Numbers; Scanning for Car Numbers; Listening to the Motor Racing Network

11
Basic Operation
Manually Inputting Car Numbers
1. PressCARonceandusethenumberkeystoinputacarnumber
youwant.Ifyourinputtednumberisfound,thescannershows
thatnumberonthedisplay.
2. Ifnocarbythatnumberisfound,“Car#XX Not Stored”
appearsonthedisplay.PressCLRtogobacktobrowsemode
andtryagain.
Scanning for Car Numbers
1. PressandholdCARuntilSCANappearsintheupperleftcorner
ofthedisplay.
2. Scanningstopsifatransmissionisfound,soyoucanlisten.When
thetransmissionstops,scanningcontinues.
n Note:Youcanprogramatwoseconddelayintothescanner.
Seepage16fordetails.
3. PressandholdCARtoreturntoregularlisteningmode.The
selectedracetypeappearsintheupperleftcornerofthedisplay.
Listening to the Motor Racing Network
1. PressMRN.M1andthepre-programmedstationnameappears
onthemiddlelineofthedisplay.
2. TurntheSEL/VOLdialtochangestations
 – OR –
 PressandholdMRNtoscanfortransmissions.
3. PressandholdCARoncetoreturntocarnumberscanning.Press
andholdagaintoregularbrowsingmode.
Intercom
1.Connectheadsettoboth(AandB)headsetjacks.
2.PressPTTonyourheadsettotalktoanotherperson.
Refertoyourheadset’suser’sguideformoredetails.