Radio Shack Racing Scanner - Advanced Operation; Frequency; Page Tag

13
Advanced Operation
Frequency
1. Followsteps1and2under“Using the EDIT Menu”andselect
FREQUENCY.
2. UsetheSEL/VOLdialtoselect1:CAR#or2:MRN,thenpressENT.
To edit existing entries:
1. Followsteps1and2under“Frequency”toselectnumber(or
driver),thenpressENT.
Edit? 1:YES 2:NOappearsonthetoplineofthedisplay.
2. Press1toeditorpress2tocancelandgobacktocarnumber/
MRNchannelselection.
3. Ifthedisplayedcarnumberiscorrect,pressENT.Ifnot,enterthe
correctcarnumberandpressENT.
4. Ifthereisalreadyacarnumberbythenumberyouinputted,
thecarnumberandDuplicate? YES:1 NO:2willappearonthe
display.Youcanstoremorethan1frequency(max26)ononecar
number.Press1toduplicatethenumberor2togobackand
enteranewcarnumber.
5. Thecarnumber,FREQUENCY,andthecurrentfrequencynumber
appearonthescreen.Usethenumberkeys(1-0)toenteranew
frequencynumberandpressENT.Thecarnumber,INPUT TAG,
andthecurrentdrivername/MRNstationnameappear.
n Note:Thedecimalpointinthefrequencyisadded
automatically.
6. UsethenumberandFUNCkeystoenteradriverorMRN
channelname.See“Text Input Method”onpage18.
7. PressENTtoreturntothelistofcarnumbersorMRNchannels.
To input a new frequency:
1. Followsteps1and2under“Frequency,”selectNEW,thenpress
ENT.CAR#orMRN#appearsonthetoplineofthedisplay.
2. InputacarnumberorMRNchannelnumber,thenpressENT.
3. Followsteps5through7under“To edit existing entries.”