Radio Shack Racing Scanner - Advanced Operation; Cloning Your Scanner; Delay

16
Advanced Operation
Cloning Your Scanner
Youcantransferyourscanner’sdatatoandfromanotherPRO-444
scannerusingaconnectingcablewith
1
/8-inch(3.5mm)stereoplugs
onbothends(notsupplied).
1. Turnonbothscanners.
2. Connectthecabletoeachscanner’sPC/IF/PHONEjack.
3. PressEDITonbothscanners.
4. UsetheSEL/VOLdialtoselectCLONE,thenpressENT.
5. ChooseRECEIVEonthescanneryouaretransferringto,then
pressENTtwice.
6. ChooseSENDonthescanneryouaretransferringfrom.
7. PressENTtwiceonthescanneryou
aretransferringfromtosendthedata.
START!!appearsonthedisplay.
8. WhenFINISH!!replacesSTART!!,remove
thecableandpressEDITtogobackto
themenu.
n Note: ERROR!! Erasing DATA!! appears
if the scanner cable is removed during data transfer. To cancel the
error, press CLR or EDIT. The target scanner resets to factory default
settings. Retry cloning the data.
Delay
Two-wayradiosystemsoftenhaveaperiodofseveralseconds
betweenaoriginalandreplytransmissions.Toavoidmissinga
transmissionwhileinscanningmode,youcanprogramatwo-second
delayintoanychannel.
1. Whilemonitoringacarchannel,pressFUNCthenDELAY.
2. Whenyourscannerstopson
acarnumberchannelwitha
programmeddelay,Dappearsand
thescannercontinuestomonitor
CLONE RECEIVE
FINISH!!
CLONE RECEIVE
START!!
Grand Am
26 Gotham Comp
D Lo 456.72500