Radio Shack Racing Scanner - Advanced Operation; Key Tone; Power Save; Display

15
Advanced Operation
Key Tone
1. Followsteps1and2under“Settings”andselectKey Tone.
2. UseSEL/VOL toselectKey Tone ONorKey Tone OFF,then
pressENT.
n Note: Turning key tones off does not turn off the error beep.
Power Save
Yourscannerfeaturesapowersavecircuitthatisautomatically
activatedwhenyoumonitorasinglecarnumberfrequency.This
allowsthereceiverto“Sleep”brieywhilewaitingforacallonthe
selectedchannel.Powersaveisoffbydefault.
1. Followsteps1and2under“Settings”andselectPower Save.
2. RotateSEL/VOLtochoosePower Save ONorPower Save
OFF,thenpressENT.
Display
1. Followsteps1and2under“Settings”andselectDisplay.
2. RotateSEL/VOLtoContrastorFrequencyandpressENT.
3. Contrastissetto08bydefault.RotateSEL/VOLtoincreaseor
decreasethecontrast(between0and15)thenpressENT.
4. Frequencydisplayisonbydefault.RotateSEL/VOLtoselectON
orOFF,thenpressENT.
Back Light
Youcansetthebacklighttoturnonwhenyoupressanybutton,or
onlywhenyoupresstheG/îbutton.
1. Followsteps1and2under“Settings”andselectBack light.
2. RotateSEL/VOLtochooseLight ON(lightturnsonwithanykey
press)orLight OFF(lightturnsonwhenyoupressG/î),then
pressENT.