EasyManuals Logo

Radio Systems Millenium-D User Manual

Default Icon
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #87 background imageLoading...
Page #87 background image
Radio Systems Millenium-D Digital Console Page 87
Channel Settings
This pull-down menu contains item selections which provide input channel opera-
tional and level settings, each selective on a channel-by-channel and/or input-by-
input basis:
1- Programming of the “cue exclusive” mode”
2- Input A & B level trim selection
3- Pre-fader level set selection
Screen #1 Cue Exclusive
Select any input where it is desired that when the front-panel cue switch is depressed, all other main outputs (PGM,
AUD, TEL) will be automatically muted.
Note, front panel bus selection lamps are not effected when in cue mode. Inputs will return to the buses selected when
the cue mode is exited.
Screen #2 Input A Level Trims
Trim input levels in .1 db steps to a maxi-
mum of 12.5 db level boost or 12.5 dB level
attenuation.
Trims should be set to match nominal oper-
ating levels (i.e.. so that all inputs present
at 0VU when the input fader is at odB (bold
line set.)
Screen #3 Input B Level Trims
The next menu option is an identical screen
for all “B” input level trims.
Screen #4 Pre-Fader Level Set
Select the output level for the pre-fader out-
put buses. These buses are then available
as utility busses as selected and routed on
the “Utility Bus” menus.
Note - output levels may be trimmed from
+15 db to off.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Radio Systems Millenium-D and is the answer not in the manual?

Radio Systems Millenium-D Specifications

General IconGeneral
BrandRadio Systems
ModelMillenium-D
CategoryDJ Equipment
LanguageEnglish