Radiodetection rd7000+ User Manual

© 2014 Radiodetection Ltd 11
5 Press the key to accept your selection and
return to the main menu
6 Press the key to return to the main operation
screen
3.4.3 Power frequency (locator only)
Select the correct frequency (50 or 60Hz) for your
country or region’s power supply.
To change power frequency on the locator:
1 Press the key to enter the menu
2 Scroll to the POWER menu using the or keys
3 Press the key to enter the POWER menu
4 Scroll up or down to select the correct frequency
5 Press the key to accept your selection and
return to the main menu
6 Press the key to return to the main operation
screen
3.4.4 Measurement Units (locator
only)
The RD7000+ marker locator allows you to work in
Metric or Imperial (US customary) units.
To select your preferred units:
1 Press the key to enter the menu
2 Scroll to the UNITS option using the or keys
3 Press the key to enter the UNIT submenu
4 Scroll up or down to select METRE (for metric) or
IMP (for imperial)units
5 Press the key to accept your selection and
return to the main menu
6 Press the key to return to the main operation
screen
3.4.5 Enable/Disable frequencies
The locator and transmitter support a wide range of
frequencies and there may be times when some of
these frequencies are not used. It is possible to quickly
enable or disable frequencies using the menu system.
To enable or disable frequencies:
1 Press the key to enter the menu
2 Scroll to the FREQ menu using the or keys
3 Press the key (on the locator) or the key (on
the transmitter)to enter the FREQ menu
4 Scroll up or down to select the frequency
5 Press the key (on the locator) or the key (on
the transmitter)to enter the frequency
6 Scroll to OFF or ON using the or keys
7 Press the key to accept your selection and
return to frequency menu.
8 If you wish to make any further changes follow
steps 4 to 6. If you do not wish to make any further
changes press the key twice to return to the
main operation screen.
3.4.6 Marker locator
By default the marker locator is enabled or disabled by
lowering or folding the marker loop antenna, item 9 in
Section 2, figure 2.1
You can choose to disable the marker locator function.
To disable the marker locator:
1 Press the key to enter the menu
2 Scroll to the MARKR menu using the or keys
3 Press the key to enter the MARKR menu
4 Scroll to OFF menu
5 Press the key to accept your selection and
return to MARKR menu
If you have disabled the marker locator you can enable
it again.
To enable the marker locator:
1 Press the key to enter the menu
2 Scroll to the MARKR menu using the or keys
3 Press the key to enter the MARKR menu
4 Scroll to Auto menu
5 Press the key to accept your selection and
return to MARKR menu
The marker locator can detect up to 9 different utility
markers. If you wish you can enable or disabling them
by using the menu system:
To enable or disable utility markers:
1 Press the key to enter the menu
2 Scroll to the MARKR menu using the or keys
3 Press the key to enter the MARKR menu
4 Scroll to the AUTO menu and press the key
5 Scroll up or down to select a specific marker
6 Press the key
7 Scroll to OFF or ON using the or keys

Radiodetection rd7000+ Specifications

General

Brand	Radiodetection
Model	rd7000+
Category	Measuring Instruments
Language	English