© 2014 Radiodetection Ltd 37
communication. Note that many PDAs will suspend
wireless connections when their battery capacity drops
below a threshold percentage. Consult your device’s
documentation for more information.
Excessive electromagnetic interference can effectively
limit the range of wireless communication and / or
corrupt data.
Your PDA device may have insufficient memory to
maintain a wireless link, particularly if the connection is
sustained over an hour or longer. Make sure you quit
applications on your PDA using the method described in
your device’s documentation.
11.4.1 Resetting connections
If you experience problems with the RD7000+ wireless
Bluetooth technology features, Radiodetection
recommends resetting the connection and then pairing
your device again.
To reset the wireless connections:
1 Press the key to enter the menu
2 Scroll to the BT menu using the or keys
3 Press the key to enter the BT menu
4 Scroll up or down to the RESET menu
5 Press the key and the locator will purge all
current connections
6 Re-pair your devices as described in section 4.4
11.4.2 Bluetooth error codes
If an error occurs when attempting to perform any
Bluetooth command using the locator to thePDA, the
LCD will display a code to help you resolve the problem
on the locator.
The codes are as follows:
Table 4.1: Bluetooth error codes
To Next Page
Loading...
Need help?
General
