© 2014 Radiodetection Ltd 35
10.1 Saving measurements
To send survey measurements, press the key.
To achieve accurate results the locator must be kept as
still as possible during the saving process.
If Bluetooth is switched on and the Bluetooth survey
measurements transmission are active the locator will
attempt to send the saved measurement to a paired
PDA running SurveyCERT, see section 11.3, or a
compatible application.
If your PDA is out of reach, or if its Bluetooth features
are disabled, the locator will display an error code. To
avoid these errors disable the Bluetooth survey
measurements transmission or ensure that your PDA is
within range and correctly paired.
For more information about Bluetooth, please refer to
Section 11.
NOTE: A flashing depth and/or current reading display
means that the measurement is poor and should be
taken again. Poor readings may be caused by nearby
conductors or sources of electromagnetic interference.
10.2 SurveyCERT
Survey measurements can be transferred wirelessly to
a compatible PDA running Radiodetection’s
SurveyCERT app or a PDA compatible application.
The Radiodetection SurveyCERT PDA app can read
and chart logged survey data for real-time or post
survey analysis. It can also export KML files for
interface with GIS/mapping systems.
NOTE: SurveyCERT is compatible with Bluetooth
enabled PDAs running Windows Mobile 6.5 as its
operating system.
To obtain SurveyCERT for PDA:
SurveyCERT for PDAs and its operation manual are
available as a free download from the Radiodetection
web Site:
1 Visit www.radiodetection.com.
2 Go to Resources > Software downloads
3 Click on the RD7000+ SurveyCERT link to get to
the SurveyCERT download page and follow the
instructions.
To Next Page
Loading...
Need help?
General
