EasyManuals Logo

RadioLink t8fb Instruction Manual

RadioLink t8fb
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
RadioLink Electronic Ltd
www.radiolink.com
3
Part 1 INTRODUCTION OF T8FB SYSTEM
1.1 T8FB Introduction
1) One two-way switch, one three-way switch, two VR switches, four trimmers, two sticks.
2) The picture below is mode1, SwB is default to control CH5, VrB is default to control CH6, SwA
is default to control CH7 and VrA is default to control CH8.
3) Universal JST battery connector supports multiple batteries, include 4pcs AA batteries or 2S to
4S LiPo battery.
4) Defaulted low battery alarm voltage can automatically match 2S and 3S LiPo battery or 4pcs
AA batteries, can setting in the T8FB configure software.
3S LiPo battery: default low voltage alarm to 11.0V automatically after detection, you can setup
low battery voltage alarm from 10.0V to 12.5V.
2S LiPo battery: default low voltage alarm to 7.3V automatically after detection, you can setup low
battery voltage alarm from 7.0V to 8.9V.
4 pcs AA Ni-MH battery: default low voltage alarm to 5.0V automatically after detection, you can
setup low battery voltage alarm from 4.0V to 6.4V.
(MODE 1

Other manuals for RadioLink t8fb

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the RadioLink t8fb and is the answer not in the manual?

RadioLink t8fb Specifications

General IconGeneral
Channels8
Frequency2.4GHz
ModulationFHSS
Spread SpectrumYes
OutputPPM
CompatibilityR8EF, R8FM
Battery4 x AA batteries
Power Supply4 x AA batteries

Related product manuals