RadioLink TrackStar D-Spec TS4G - Idle-Up IDLUP

24
Initial value: 0
2. (Brake side acceleration amount adjustment)
Press “Dec(-)” or “Inc(+)” button to select “
BRAK
”, press“Enter”key to confirm and
the initial value of “BRAK” will blink,then use“Dec(-)”or“Inc(+)”button adjust the
acceleration amount.
(Note: In the interface of adjusting the value, return to the initial value"0"
by pressing
“Dec(-)” and “Inc(+)” buttons simultaneously for about 1 second.)
Press “Enter” button, the adjusted value stops blinking,now the value has been set.
"0":No acceleration
"100":Maximum acceleration (Brake side maximum steering angle)
Brake side acceleration amount(BRAK)
0~100
Initial value: 0
3. When ending setting, return to the initial screen by pressing “Exit” button twice.
Idle up at engine start
Use this function to improve the starting characteristics of the engine by raising the
idling speed when starting the engine of a gas powered car.
Idle-Up rate (RATE)
D50% ~ D1%, 0%, U1% ~ U50%
Initial value: 0%
"D": Brake side
"U": Forward side
Idle-Up "IDLUP"