RadioLink TrackStar D-Spec TS4G - ATL Function ATL

28
Brake side adjustment
This function decreases the set value when the braking effect is strongand
increases the set value when the braking effect is weak.
Setup Item
RATE:Brake amount
Brake amount (RATE)
0~100%
Initial value: 100%
1.Enter the function menu and use “Dec(-)” or “Inc(+)”
button to access ATL function.
2.Press “Enter” button to get into ATL function interface.
3.Press “Enter” key, and the initial value of RATE will blink. Use “Dec(-)” or
“Inc(+)” button to adjust the value.
(Note: In the interface of adjusting the value, return to the initial value "100%"by
pressing “Dec(-)” and “Inc(+)” buttons simultaneously for about 1 second.)
Press “Enter” button, the adjusted value stops blinking , now the value has been set.
4.When ending setting, return to the initial screen by pressing“Exit” button twice.
Programmable mixes between arbitrary channels
These functions allow you to apply mixing between the steering,throttle, andchannel
3 channels.
Setup items
LEFT:Mixing rate (Left side)
RGHT:Mixing rate (Right side)
MST:Master channel
SLV:Slave channel
Programmable Mixes "PMIX"