RadioLink TrackStar D-Spec TS4G - Low Battery Voltage Alarm; Gyro Sensitivity Settings

Lower volt
ondepands
it
adjustable,
32
3.After accomplish ment of naming,all characters of current name will stop blinking,
the new namewill be stored automatically.
4.When ending setting,return to the initial screenby pressing“Exit” button twice.(the
new setting model name will appear on the initial screen)
The transmitter’s low voltage alarm
󰾡 battery,
the 4.6V
is may cause the battery over discharge and
damage the battery.So
you can set transmitter’s
warning
voltage when
you use different battery.
There are four options you can choose:
Li2S-7.2V
Li3-10.8V
Ni4S-4.6V
CUSTOM: adjustable 4.6V to 12.0V.
Low battery voltage alarm
The car will be out of control if the battery runs out,
please immediately stop running
when the alarm starting to ring.
what kind of
for 1s Lithium battery.
Ｇｙｒｏ Ｓｅｎｓｉ ｔ ｉ ｖｉ ｔ ｙ
Ｔｈｉ ｓ ｆ ｕｎｃｔ ｉ ｏｎ ｉ ｓ ａｖａｉ ｌ ａｂｌ ｅ ｔ ｏ ｓｅｔ ｇｙｒｏ ｓｅｎｓｉ ｔ ｉ ｖｉ ｔ ｙ ａｎｄ ＶＲ ｍｉ ｘｉ ｎｇ ＯＦ ｏｒ ＯＦＦ．
Ｗｈｅｎ ｉ ｓ ＭＩ Ｘ ｉ ｓ ｓｅｔ ＯＦＦ， ｇｙｒｏ ｉ ｓ ｄｉ ｓａｂｌ ｅｄ； Ｗｈｅｎ ｔ ｈｅ ＭＩ Ｘ ｉ ｓ ｓｅｔ ＯＮ， ｙｏｕ ｃａｎ
ａｄｊ ｕｓｔ ｇｙｒｏ ｓｅｎｓｉ ｔ ｉ ｖｉ ｔ ｙ ＳＴＤ ｏｒ ＣＨ３． ＳＴＤ ｉ ｓ ａｄｊ ｕｓｔ ｅｄ ｏｎ ｓｃｒｅｅｎ ａｎｄ ＣＨ３ ｃａｎ
ｂｅ ａｄｊ ｕｓｔ ｅｄ ｂｙ ＶＲ ｂｕｔ ｔ ｏｎ． ＣＨ３ ｉ ｓ ｄｅｆ ａｕｌ ｔ ｅｄ ｂｙ ＶＲ ｓｗｉ ｔ ｃｈ．
Ｉ ｎ ｎｏｒｍａｌ ｍｏｄｅ （ ＳＴＤ） ， ｒａｎｇｅ ｏｆ ｓｅｎｓｉ ｔ ｉ ｖｉ ｔ ｙ ｉ ｓ ０－ １００
１． ｅｎｔ ｅｒ ｔ ｈｅ ｍｅｎｕ， ｕｓｅ Ｄｅｃ（ － ） ａｎｄ Ｉ ｎｃ（ ＋） ｔ ｏ ｓｅｌ ｅｃｔ ｏｐｔ ｉ ｏｎｓ ｆ ｏｒ Ｇｙｒｏ ｓｅｎｓｉ ｔ ｉ ｖｉ ｔ ｙ
2.press the key button Enter to enter sub-menu
3.press Enter again, the initial value will start
change the value.
Gyro Sensitivity
flashing, then use Dec (-) and Inc (+) to