RadioLink TrackStar D-Spec TS4G - Dual Rate D;R

27
Dual rate
The steering left and right servo travels are adjusted simultaneously.When you want
to increase the servo travel, adjust the + side.When you want to decrease the servo
travel, adjust the – side.
Setup Item
Steering D/R
RATE
Throttle D/R
RATE
Steering D/R rate (RATE)
0~100%
Initial value: 100
Throttle D/R rate (Throttle D/R RATE)
0~100%
Initial value: 100
1.Enter the function menu and use “Dec(-)” or “Inc(+)” button to access D/R
function.
2.Press“Enter” button to get into D/R function interface.
3. Use “Dec(-)” or “Inc(+)” button to select Steering
D/R
RATE
,press “Enter” key,
and the initial value of Steering D/R RATE will blink.Use“Dec(-)”or “Inc(+) ”
buttonto make adjustments.
(Note: In the interface of adjusting the value, return to the initial value "100" by
pressing“Dec(-)” and “Inc(+)” buttons simultaneously for about 1 second.)
4.Press “Enter” key, the adjusted value stops blinking, now the steering D/R
RATE
has been set.
5. Throttle D/R RATE can be set similarly.
6.When ending setting, return to the initial screen by pressing “Exit” button twice.
ATL Function "ATL"