button twice, the
phase correction is completed.
press code
In this situation, short
When to the right,wheel left correction.
When rotating the car to the left,wheel
to observe whether the gyro is correcting wheel.
turn around the car
forward direction.
, then the
code button for once(less than 1 second),
, then gyro works in backward direction.
engine doesn't move
release the accelerator
the
3.Gyro usage method in forward and backward direction:
When gyro in working state, pull
remote acceleraterto keep the car move forward for a distance,
in the premise of not playing the direction key,
turn around the
car body,
You need
the right light flashes once
4.Gyro phase adjustment:
When the gyro works in forward direction,
if the steering
to short press the
gyro works in
Steering trim display
Throttle trim display
Display when power switch turned on
8
To Next Page
Loading...
