RadioLink TrackStar D-Spec TS4G - Channel 3 and Channel 4 Position AUX

30
“Dec(-)” and “Inc(+)” buttons simultaneously for about 1 second.)
Press “Enter” key, the adjusted value stops blinking,the selected mixing amount has
been adjusted.
4.(Right, brake or down side mixing amount adjustment)
Mixing amount
-100~0~+100
Select the setting item "RGHT", "BRAK", or "DOWN"(These setup items are
different depend on the master channel.ST:"RGHT"; TH:"BRAK"; CH3:"DOWN ")
by pressing “Dec(-)” or “Inc(+)” button.Press“Enter”key,the initial value of
"RGHT", "BRAK", or "DOWN" will blink, Use“Dec(-)”or “Inc(+)”button to adjust
the right, brake, or down side mixing amount.
(Note: In the interface of adjusting the value,return tothe
initial
value"0"by pressing
“Dec(-)” and “Inc(+)” buttons simultaneously for about 1 second.)
Press “Enter” key, the adjustedvalue stops blinking,the selected mixing amount has
been adjusted.
5. (Mixing mode setup)
Mixing mode (MXMD)
OFF, MIX
Initial value: OFF
Select setup item"MXMD"by pressing“Dec(-)” or “Inc(+)” button, press “Enter”
button,the initial mixing mode“OFF”will blink.Press“Dec(-)”or “Inc(+)”buttonto
switch “OFF” to “MIX”, press “Enter” button, the blinking “MIX” will stop
blinking.
"OFF":Mixing proportional to master channel operation.
"MIX":Mixing by master channel another function considered.
6. When ending setting, return to the initial screen by pressing “Exit” button twice.
Channel 3 and Channel 4 Position "AUX"