RADIOMETER FLEX ABL90 User Manual

Index
1. What is what 4
2. Syringe samples – preanalytical errors 5-6
3. Syringe samples – how to measure a patient sample 7-9
4. Capillary samples – preanalytical errors 10-11
5. Capillary samples – how to measure a patient sample 12-14
6. Consumables 15
7. Changing consumables 16-18
8. Troubleshooting 19
9. General information 20
10. Key Operator Training 21
11. Replacements 22-23
12. Clean the analyzer 24
13. Troubleshooting and guide 25
14. Quality control and calibrations 26-28
15. Theoretical aspects of the blood gas analyzer 29-30
16 Parameters 31
17. Limitations of the measuring system 32-34
18. Analyzer setup 35
3
3 of 36EXT-VEND-MAN-0023-1 Owner:Julie Monnox Approved:27 Mar 2019

RADIOMETER FLEX ABL90 Specifications

General

Analyzer Type	Blood Gas Analyzer
Analysis Time	35 seconds
User Interface	Touch screen
Power Supply	100-240 V AC, 50/60 Hz
Parameters Measured	pH, pCO2, pO2
Sample Type	Whole blood
Sample Volume	65 µL
Calibration	Automatic
Connectivity	USB, Ethernet
Operating Temperature	15-30°C
Operating Humidity	20-85% relative humidity, non-condensing