RADIOMETER FLEX ABL90 User Manual

33
Analyzer setup
Managing operators
• Analyzers set up for anonymous use: Operators do not have to log on
• The access profile selected for anonymous use specifies the short cut
buttons and menus available for anonymous operators
For further instructions on how to manage operators, please refer to the
latest version of “ABL90 FLEX Instructions for use” (under “Setup”).
Setup and Data backup
For further instructions and details on the setup of the various analyzers,
please refer to the latest version of “ABL90 FLEX Instructions for use” (under
“Setup”).
33 of 36EXT-VEND-MAN-0023-1 Owner:Julie Monnox Approved:27 Mar 2019

RADIOMETER FLEX ABL90 Specifications

General

Analyzer Type	Blood Gas Analyzer
Analysis Time	35 seconds
User Interface	Touch screen
Power Supply	100-240 V AC, 50/60 Hz
Parameters Measured	pH, pCO2, pO2
Sample Type	Whole blood
Sample Volume	65 µL
Calibration	Automatic
Connectivity	USB, Ethernet
Operating Temperature	15-30°C
Operating Humidity	20-85% relative humidity, non-condensing