RADIOMETER FLEX ABL90 User Manual

7
Syringe samples – how to measure a patient sample
1. Operator identification
• Sharing barcodes
• Accountability and traceability
• Patient records are kept according to local rules (usually records
are kept for many years)
2. "Ready" mode
Point to the analyzer status field and explain how the analyzer
will display current activity. The analyzer can only measure
samples when the screen shows “Ready”.
Training method
First, demonstrate how a sample is measured in real-time speed before doing a slow step-by-step
demonstration. Let the trainee try the process – both with and without trainer guidance.
Emphasize how the analyzer provides feedback (sound and light indications) and provides on-screen
guidance throughout the process.
7 of 36EXT-VEND-MAN-0023-1 Owner:Julie Monnox Approved:27 Mar 2019

RADIOMETER FLEX ABL90 Specifications

General

Analyzer Type	Blood Gas Analyzer
Analysis Time	35 seconds
User Interface	Touch screen
Power Supply	100-240 V AC, 50/60 Hz
Parameters Measured	pH, pCO2, pO2
Sample Type	Whole blood
Sample Volume	65 µL
Calibration	Automatic
Connectivity	USB, Ethernet
Operating Temperature	15-30°C
Operating Humidity	20-85% relative humidity, non-condensing