RadiSys PROCELERANT SB5520DT1-SATA - Page 58

3
BIOS Configuration
58
Startup Delay
(available if PEF Support is
enabled)
Select Enable to enable startup delay support. The options are Enabled and
Disabled.
PEF Startup Delay
(available if Startup Delay
is enabled)
This feature enables you to select the delay time setting after PEF startup. The
options are No Delay, 30 Sec., 60 Sec., 1.5 Min., and 2.0 Min.
Event Message for PEF
Action
(available if PEF Support is
enabled)
Select Enable to enable Event Messages for PEF action. For more information, refer
to the IPMI 1.5 Specification on Intel’s Web site. The options are Disabled and
Enabled.
BMC Watch Dog Timer
Action
This feature allows the BMC to reset or power down the system if the OS hangs or
crashes. The options are Disabled, Reset System, Power Down, Power Cycle.
BMC Watch Dog TimeOut
[Min:Sec]
This is a timed delay in minutes or seconds before a power down or system reset
due to an OS failure. The options are [5 Min], [1 Min], [30 Sec], and [10 Sec].
Table 56. SET PEF Configuration submenu (Continued)
BIOS item Usage