7
PREFACE
About this manual
This manual describes the RadiSys Procelerant® SB5520DT1 motherboard. This manual is
intended for professional technicians, system integrators, and knowledgeable personal
computer users.
The manual is organized as follows:
Chapter 1, Introduction, on page 9 describes the features, specifications, and performance
of the motherboard and provides detailed information about the chipset.
Chapter 2, Hardware Reference, on page 19 provides hardware reference information.
Chapter 3, BIOS Configuration, on page 37 includes an introduction to the BIOS and
provides detailed information on running the CMOS Setup utility.
Chapter A, BIOS Beep Codes and Checkpoints, on page 67 lists BIOS POST error codes.
Chapter B, Installing the Windows OS, on page 71 provides instructions for installing the
Windows operating system.
Safety notices
Electrostatic discharge
WARNING! This product contains static-sensitive components and should be handled with care.
Failure to employ adequate anti-static measures can cause irreparable damage to components.
To avoid electrostatic discharge (ESD) damage, the following precautions are strongly
recommended.
Keep each module/PCB in its ESD shielding bag until you are ready to install it.
Before touching a module, attach an ESD wrist strap to your wrist and connect its other end
to a known ground.
Handle the module only in an area that has its working surfaces, floor coverings, and chairs
connected to a known ground.
Hold modules only by their edges and mounting hardware. Avoid touching PCB
components and connector pins.
For further information on ESD, visit www.esda.org.
To Next Page
Loading...
