RADWAG AS series User Manual

- 17 -
Fig. 7. Balance main menu – submenu selection
In order to edit a submenu, press RIGHT ARROW key, which opens the content of
selected submenu. When inside the submenu structure, the user can select an option to be
edited (modified) by placing the cursor next to submenu name (use up and down
navigating arrows). When the cursor is placed next to desired option press RIGHT
ARROW key to enter submenu settings.
Balance reactions for above procedure:
- A specific process (e.g. balance adjustment) which is carried out in a submenu
described as a function;
- Editing an attribute of a submenu (flickering digit of a submenu setting enables
changing parameter value of entering a sequence of characters)
Fig. 8. Balance submenu – selection buttons

RADWAG AS series Specifications

General

Display	LCD with backlight
Maximum Capacity	Varies by model
Readability	Varies by model
Pan Size	Varies by model
Calibration	Internal or external, depending on model
Stabilization Time	≤ 3 seconds
Interface	RS232, USB
Repeatability (Standard deviation)	Varies by model
Linearity	Varies by model
Net Weight	Varies by model
Protection Class	IP 43