RADWAG AS series User Manual

- 85 -
20. COOPERATION WITH EPSON RECEIPT PRINTER
For the purpose of using Polish letters in the printouts it is necessary to:
− On the beginning of a printout that is programmed in a balance add a formula on
coding page change to CP 852
Recording scheme:
\1B\74\12\c
− Design a label template using according to user needs and bearing in mind the
following relations for use of Polish letters:
ą ć ę ł ń ó ś ź ż
CP 852 \A5 \86 \A9 \88 \E4 \A2 \98 \AB \BE
Ą Ć Ę Ł Ń Ó Ś Ź Ż
CP 852 \A4 \8F \A8 \9D \E3 \E0 \97 \8D \BD
(instead of using Polish letters insert their code equivalents)
If after completing a printout the paper should be cut, then at the end of a designed printout
template add a text:
\1D\56\41\08\C
Cross-section through connecting cable
balance– Citizen printer , balance – Epson printer
Fig. 70. Cross-section through connecting cable: balance – Epson printer

RADWAG AS series Specifications

General

Display	LCD with backlight
Maximum Capacity	Varies by model
Readability	Varies by model
Pan Size	Varies by model
Calibration	Internal or external, depending on model
Stabilization Time	≤ 3 seconds
Interface	RS232, USB
Repeatability (Standard deviation)	Varies by model
Linearity	Varies by model
Net Weight	Varies by model
Protection Class	IP 43