3. APPLICATION
Balance featuring a graphic display is intended to precise determining mass in laboratory
conditions. The balance enables zeroing the indication in whole measuring range.
Balance AS/X series enables determining mass in the following measuring units:
Fig. 2. Measuring units
Apart from determining mass of weighed object using different measuring units, the
software balance AS/X series comprises the following working modes:
− parts counting
− checkweighing
− filling (doing)
− percent setup
− animal weighing
− determining density of solids and liquids
− mixtures from accepted formulation and ingredients
− formula making
− pipette calibration
− statistics
Both measuring units and working modes can be set as inaccessible in the user menu.
This option is implemented for the purpose of adjusting balance to user needs and
requirements, i.e. providing access only to those functions and units which are required by
a user.
Determining accessibility attribute of a working mode / measuring unit is set in
balance’s menu and it is described further in this user manual.
To Next Page
Loading...
