RADWAG AS series

- 29 -
9. DATE AND TIME SETTINGS
The balance AS/X series features an internal real-time clock, and its parameters are
editable. Go to submenu P3 Date/Time following prompts given on below figure.
Fig. 18. Submenu Date / Time
01 Date format
Enables two types of setting date format:
- 1 date format Month/Day/Year
- 0 date format Day/Month/Year
On selecting appropriate date format accept it by pressing ENTER key.
02 Time format
Enables two types of setting time format:
- 1 time format 12 hours
- 0 time format 24 hours
On selecting appropriate time format accept it by pressing ENTER key.
12 hour time format is differentiated by letters PM or AM present on printouts.