Caution:
It is possible to use an option for searching a report.
List of parameters in a report from drying process:
1. Start date
2. End date
3. Drying time [ average moisture content value obtained in the
test time]
4. Status [ data on drying process]
5. Start mass [ initial mass on drying process start]
6. End mass [ mass on completion of drying process]
7. Result [ final drying result]
8. Measurements [ the following measurements saved during the
course of drying process]
9. User [ name of a user who carried out drying process]
10. Product [ name of a product that was dried]
11. Drying program [ name of a drying program used for carrying out
the drying process]
12. Drying chart [ a chart demonstrating progress of a drying
process]
Procedure
• Enter submenu < Databases>
• Press < Reports from drying process (Drying reports)> key
• Press field of a desired report record, by pressing name of the
report (Report’s name consists of date and time of its creation)
• Press option < Chart>
The software automatically generates and opens a chart in the coordinate
system of measurement (moisture content unit) / measurement time for
completed moisture content analysis.
An instance of a chart from completed moisture content analysis for a sample,
from a record saved in the database of drying reports.
To Next Page
Loading...
Need help?
General
