16. WORKING MODES – general information
A moisture analyzer MA 3Y series in its standard version features the following
working modes:
Means of operation: weight of a load is determined through an
indirect measurement. A moisture analyzer measures
gravitational acceleration force which attracts the load.
Obtained data is processed into a digital format and displayed
in a form of measurement result.
Drying
Means of operation: determining moisture content in a sample,
obtained by vaporization of all moisture components from a
sample placed inside a drying chamber of a moisture analyzer.
A measurement result is automatically calculated by the
software and visualized on an ongoing basis on moisture
analyzer’s display by comparing mass of a sample on
measurement start, in progress, and at the end of dying
The settings of <DRYING> mode provide access to special functions. They
enable adapting mode’s operation to user’s individual needs. The special
settings are activated on selecting a corresponding profile. A detailed
description of the mode is presented further in this user manual.
16.1. Working mode selection
Changing working mode:
o Press name of an active working mode, displayed in the left corner of the
upper bar.
o List of available working modes is displayed,
To Next Page
Loading...
Need help?
General
