To return to the standard means of displaying a drying result, again tap the
white coloured field with visible drying result. The display returns to its default
size.
9. LOGGING
Full access to moisture analyzer’s parameters and editing databases requires
logging to instrument’s software as an operator with <Administrator>
access level. The logging procedure should be carried out on each switching on
the instrument.
First log in procedure
• While in the main window of the application, press <Log in> text located
in the upper bar of the display, which opens a window with operators
database including < Admin> entry,
• On entering the < Admin> entry, the software activates on-screen
keyboard for entering operator’s password,
• Insert password “1111” and accept it by pressing key,
• The software automatically returns to displaying the main window, and
the display’s upper bar indicates word <Admin> instead of <Log in>,
• If needed, insert user specific name and password, and set
administrator’s access level. This way, no one except for authorized
operator can make changes in moisture analyzer settings.
• After first logging in, the administrator should add user profiles and set
their corresponding access level (the procedure of assigning access levels
is described further in this user manual, see point 13 & 14).
On future logging in, select a user from the list, and on entering password
the software initiates operation with access level set for a corresponding
user.
Log out procedure
• While in the main window of an application, press name of a logged
operator located in the display’s upper bar. A window with operators
database is opened,
• Press <Log out> soft key (located as position no. 1 in the list of
operations)
• The software returns to the main window, and the display’s upper bar
indicates word <Log in> instead of name of a logged operator.
To Next Page
Loading...
Need help?
General
