RADWAG MAX 60

86 pages

To Next Page

To Next Page

Loading...

User manual no.:

LMI-49-05/04/13/A

MOISTURE

ANALYZER

MAX

SERIES

BALANCES AND SCALES

RADWAG 26 – 600 Radom, Bracka 28, POLAND

Phone: +48 (0-48) 38 48 800, fax. +48 (0-48) 385 00 10

export@radwag.com

www.radwag.com

Table of Contents

Default Chapter3
- Table of Contents3
1 Technical Data6
2 Basic Information7
- Intended Use7
- Inappropriate Use8
- Principles of Safety Use8
- Warranty9
- Monitoring Metrological Parameters of the Instrument9
- Data Included in this User Manual9
- Staff Competence9
3 Transport and Storage10
- Delivery Check10
- Packaging10
4 Unpacking, Assembling and Startup10
- Assembling and Place of Use10
- Unpacking11
- Level Setting12
- Standard Delivery Components12
- Cleaning12
- Plugging to Mains12
- Connecting Peripheral Equipment13
5 Keyboard13
6 Moisture Analyzer's Menu14
7 Moving through User Menu15
- Menu Operation Using Moisture Analyzer Keyboard15
- Menu Operation Using External Computer Keyboard18
8 User Menu19
- Moisture Analyzer Adjustment19
- Determining Content of a Printout for GLP Procedures27
- Date and Time Settings29
- Setting Moisture Analyzer Operating Parameters31
- Chamber32
- RS 232 Functions33
  - RS 232 Parameter Settings33
- Printouts34
- Moisture Analyzer Parameter Settings41
  - Entering Menu Group P7 Other41
  - Parameter Settings41
9 Drying Process with Use of Shortened Menu44
- Enabling Shortened Menu44
- Means of Setting Drying Parameters45
- Means of Drying Process According to Parameters Set in the Shortened Menu50
10 Drying Process with Use of Drying Program Library54
- Defining a Drying Procedure54
- Entering Name of a Drying Program55
- Drying Mode Selection56
- Drying Temperature Setting57
- Finish Mode Settings58
- Setting the Type of Displayed and Printed Measurement Result58
- Setting Printout Interval59
- Setting Size of a Sample to be Tested59
- Setting a Corrective Coefficient60
- Restore Default Setting61
- Printout of Software Settings62
- Memory64
11 Testing Procedure Using a Drying Program from the Library of Drying Programs65
12 Sample Preparation for a Drying Process67
- Principles of Humidity Content Determination in a Moisture Analyzer67
- Sampling and Preparation67
13 Selection of Drying Parameters70
- Selecting Optimum Sample Mass70
- Influence of Sample Mass on Measurement Result Repeatability70
- Drying Temperature70
- Selecting a Drying Mode71
- Selecting Drying Time72
- Drying Mode Analysis73
14 Cooperation with a Printer or a Computer74
- Connecting Cables74
15 List of Commands Computer - Balance75
16 User Guidelines77
17 Moisture Analyzer Maintenance Activities78
- Cleaning Moisture Analyzer Components78
- Temperature Sensor Cleaning79
- Replacing the Fuses80
- Troubleshooting81
- Error Messages82
18 Memory of Carried out Measurements84
19 Means of Using a Moisture Analyzer for Drying in85
Temperature over 160°C85
- Means of Using a Moisture Analyzer for Drying in Temperature over 160°C85

Questions and Answers:

S
Steven ElliottAug 11, 2025
What to do if RADWAG Measuring Instruments display is dark?
- N
  Natalie AlvarezAug 11, 2025
  If your RADWAG Measuring Instruments display remains dark, it could be due to several reasons. First, check the mains voltage to ensure there is power. If the voltage is present, inspect the power cord for any damage and replace it if necessary. Also, the fuse of the moisture analyzer might be damaged, so replace it. If none of these steps resolve the issue, the moisture analyzer itself may be defective, requiring you to contact customer support for repair.
S
Sabrina GrimesAug 21, 2025
Why are measurements not repeatable on RADWAG Measuring Instruments?
- A
  Angela Olson DDSAug 21, 2025
  Non-repeatable measurements on RADWAG Measuring Instruments can stem from several factors. The sample content might be non-uniform, so prepare the sample from a larger amount of substance. The drying time could be too short, necessitating a change in the testing process finish mode criteria. High drying temperature may cause the sample to oxidize or boil, so lower the drying temperature. A contaminated or defective temperature sensor may also be the cause, thus clean the temperature sensor. Instability of the workbench or incompatible ambient conditions (vibrations, drafts, etc.) can also affect measurements, so change the location of instrument’s operation and ensure compatible ambient conditions according to the user manual.
D
dcollierAug 31, 2025
How to decrease pending time for drying process finish on RADWAG Measuring Instruments?
- R
  Rachel MartinezAug 31, 2025
  If the drying process is taking too long on your RADWAG Measuring Instruments, it might be due to an incorrect selection of the finish mode. To resolve this, carry out experimental tests to select a proper means of finish mode.

RADWAG MAX 60 Specifications

General

Brand	RADWAG
Model	MAX 60
Category	Measuring Instruments
Language	English

Related product manuals

Preview: RADWAG MA 3Y

Preview: RADWAG MA 50/1.R

RADWAG MA 50/1.R

RADWAG WLT 30/60/L3

Preview: RADWAG WLC 6/F1

RADWAG WLC 6/F1

RADWAG PS 600.R2

RADWAG PS 6000.R2

RADWAG PS 6100 R2