RADWAG MAX 60

- 14 -
Zero / Tare key – zeroing moisture analyzer’s indication.
On/Off key – switch on/off display of moisture analyzer. On
switching off the display of the device, other subassemblies
are continuously supplied, and the moisture analyzer is in
standby mode.
Display key –
changes type of data displayed during and
after drying process.
Setup key – enter to main menu.
Test menu key – function key for selecting drying modes.
6. MOISTURE ANALYZER’S MENU
User menu of the moisture analyzer MAX series is divided into two sections. The first one is
made available on pressing SETUP key. This menu enables setting the following parameters:
moisture analyzer and temperature sensor adjustment, setting date and time format,
programming printouts and communication parameters with peripheral equipment, and setting
user profile parameters.
The second menu is accessible on pressing TEST MENU key, and it is dedicated to setting
parameters of basic drying mode, including: drying temperature, drying mode, time and other
parameters. The menu additionally provides access to the library of drying programs. The
library stores up to 99 different drying procedures containing detailed settings on drying modes
of various substances.
P1 Adjustment
P1 01 External adjustment
P1 02 User adjustment
P1 03 Adjustment test
P1 04 Temperature adjust.
P1 04 Adjustment report
printout
P1 05 Drying test
P2 GLP
P2 01 User
P2 02 Project
P2 03 Print time
P2 04 Print date
P2 05 Print user name
P5 RS-232
P5 01 Baud rate
P5 02 Parity
P5 03 Data bits
P5 04 Stop bits
P5 05 Handshake
P5 06 Print stable
P5 07 Printout type
P5 08 Paper cut off
P6 Printouts
P6 01 Printout no.
P6 02 Header no.
P6 03 Line no.
P6 04 Footer no.
P6 05 Printout 1 start
P6 06 Printout 1 stop